Khác biệt giữa bản sửa đổi của “PCI Express”

Bách khoa toàn thư mở Wikipedia
Nội dung được xóa Nội dung được thêm vào
Không có tóm lược sửa đổi
Không có tóm lược sửa đổi
Dòng 1: Dòng 1:
[[hình:PCI Express logo.svg|thumb|right]]
'''PCI Express''', viết tắt là '''PCIe''' (đôi khi dễ nhầm với PCI Extended, viết tắt là [[PCI-X]]), là một dạng giao diện [[bus hệ thống]]/[[card mở rộng]] của máy tính. Nó là một giao diện nhanh hơn nhiều và được thiết kế để thay thế giao diện [[PCI]], PCI-X, và [[AGP]] cho các card mở rộng và card đồ họa. Khe cắm PCI Express (PCIe) hoàn toàn khác so với các chuẩn trước như PCI hay PCI Extended (PCI-X).
'''PCI Express''', viết tắt là '''PCIe''' (đôi khi dễ nhầm với PCI Extended, viết tắt là [[PCI-X]]), là một dạng giao diện [[bus hệ thống]]/[[card mở rộng]] của máy tính. Nó là một giao diện nhanh hơn nhiều và được thiết kế để thay thế giao diện [[PCI]], PCI-X, và [[AGP]] cho các card mở rộng và card đồ họa. Khe cắm PCI Express (PCIe) hoàn toàn khác so với các chuẩn trước như PCI hay PCI Extended (PCI-X).



Phiên bản lúc 06:06, ngày 10 tháng 4 năm 2007

PCI Express, viết tắt là PCIe (đôi khi dễ nhầm với PCI Extended, viết tắt là PCI-X), là một dạng giao diện bus hệ thống/card mở rộng của máy tính. Nó là một giao diện nhanh hơn nhiều và được thiết kế để thay thế giao diện PCI, PCI-X, và AGP cho các card mở rộng và card đồ họa. Khe cắm PCI Express (PCIe) hoàn toàn khác so với các chuẩn trước như PCI hay PCI Extended (PCI-X).

As with all computing standards, PCIe is a technology which receives further development and improvement. The current standard version in general use at time of writing is PCIe 1.1 however PCI-SIG announced the availability of the PCI Express Base 2.0 specification on 15 January 2007. PCIe 2.0 doubles the PCIe bus standard throughput or bandwidth from 2.5Gbps to 5Gbps. PCIe 2.0 is still compatible with PCIe 1.1 as a physical interface slot and from within software, so older cards will still be able to work in machines fitted with this new version. Further information on PCIe 2.0 is detailed below.

PCIe is a flexible hybrid serial-parallel interface format. That is, it uses multiple connections each of which individually transmit a single stream of data in parallel to one another. This type of interfacing is sometimes referred to as Channel bonding. PCIe 1.1 transfers data at 250 MB/s in each direction per lane. With a maximum of 32 lanes, PCIe allows for a total combined transfer rate of 8 GB/s in each direction. To put these figures into perspective, a single lane has nearly twice the data rate of normal PCI, a four lane slot has a comparable data rate to the fastest version of PCI-X 1.0, and an eight lane slot has a data rate comparable to the fastest version of AGP.

Unlike preceding PC expansion interface standards, PCIe is both full duplex and point to point. This means that while standard PCI-X (133mhz 64 bit) and PCIe x4 have the same data transfer rate, PCIe x4 will give better performance if multiple device pairs are communicating simultaneously or if communication within a single device pair is bidirectional.

While in development, PCI Express (PCIe) was referred to as Arapaho or 3GIO for 3rd Generation I/O.