Miêu tảNew VLT component created using 3D printing.jpg
English: ESO has utilised the innovative technology of 3D printing to manufacture moulds for the casting of two new components required for the MUSE instrument on ESO's Very Large Telescope (VLT) in Chile. This technique offers great promise in the manufacture of complex custom items, which are often needed in astronomical instrumentation, delivering the components more quickly and cheaply and with greater flexibility. The component, the structural body of a new sensor arm, appears in the centre of the picture and is the mounting point for three mirrors.
This media was created by the European Southern Observatory (ESO). Their website states: "Unless specifically noted, the images, videos, and music distributed on the public ESO website, along with the texts of press releases, announcements, pictures of the week, blog posts and captions, are licensed under a Creative Commons Attribution 4.0 International License, and may on a non-exclusive basis be reproduced without fee provided the credit is clear and visible." To the uploader: You must provide a link (URL) to the original file and the authorship information if available.
chia sẻ – sao chép, phân phối và chuyển giao tác phẩm
pha trộn – để chuyển thể tác phẩm
Theo các điều kiện sau:
ghi công – Bạn phải ghi lại tác giả và nguồn, liên kết đến giấy phép, và các thay đổi đã được thực hiện, nếu có. Bạn có thể làm các điều trên bằng bất kỳ cách hợp lý nào, miễn sao không ám chỉ rằng người cho giấy phép ủng hộ bạn hay việc sử dụng của bạn.
https://creativecommons.org/licenses/by/4.0CC BY 4.0 Creative Commons Attribution 4.0 truetrue
Chú thích
Ghi một dòng giải thích những gì có trong tập tin này
Tập tin này chứa thông tin bổ sung, có thể được thêm từ máy ảnh kỹ thuật số hoặc máy quét được sử dụng để tạo hoặc số hóa tệp.
Nếu tập tin đã được sửa đổi so với trạng thái ban đầu, một số chi tiết có thể không phản ánh đầy đủ tập tin đã sửa đổi.
Ngày giờ sinh dữ liệu
11:00, ngày 10 tháng 2 năm 2014
Tiêu đề của hình
ESO has utilised the innovative technology of 3D printing to manufacture moulds for the casting of two new components required for the MUSE instrument on ESO's Very Large Telescope (VLT) in Chile. This technique offers great promise in the manufacture of complex custom items, which are often needed in astronomical instrumentation, delivering the components more quickly and cheaply and with greater flexibility. The component, the structural body of a new sensor arm, appears in the centre of the picture and is the mounting point for three mirrors.