Tập tin:Millisecond Pulsar.jpg
Tập tin gốc (3.000×2.513 điểm ảnh, kích thước tập tin: 632 kB, kiểu MIME: image/jpeg)
Tập tin này từ Wikimedia Commons. Trang miêu tả nó ở đấy được sao chép dưới đây. Commons là kho lưu trữ tập tin phương tiện có giấy phép tự do. Bạn có thể tham gia. |
Miêu tả
Miêu tảMillisecond Pulsar.jpg |
English: The diagram outlines each step needed to create a pulsar with a superfast spin. The Standard Scenario (1-4):
1. A massive supergiant star and a “normal” Sun-like star orbit each other in a binary star system. 2. The massive star exhausts its nuclear fuel and explodes in a supernova, leaving a neutron star as its remnant. For several tens of millions of years, that neutron star is likely active as a radio pulsar. Eventually it slows down, turns off as a pulsar and becomes simply a cooling neutron star. 3. After billions of years, and if the binary survived the supernova, the lower-mass star evolves and expands into a red giant. Material from the star spills into a disk around the neutron star and eventually onto the neutron star surface in a process known as “accretion.” Accretion transfers angular momentum to the neutron star and makes it spin more rapidly. During this process, the system is visible as an X-ray binary. 4. Once accretion ends, the neutron star is spinning very rapidly and emerges as a millisecond radio pulsar. This process is known as “recycling.” Strong “winds” from the pulsar slowly erode away the companion star, which can eclipse the pulsar’s radio emission. But in a globular cluster (2b)… There are so many stars packed so densely together that interactions between ancient “dead” neutron stars and normal stellar binaries can occur (top). When that happens, in a process called “exchange,” the lowest mass star is usually ejected from the binary and the neutron star replaces it (bottom). Once the remaining normal star evolves into a red giant, the rest of the standard “recycling” scenario (3-4) takes place. These interactions and exchanges explain why globular clusters have so many more millisecond pulsars per unit mass than the Galactic disk. |
Ngày | |
Nguồn gốc | https://public.nrao.edu/gallery/how-to-make-a-millisecond-pulsar/ |
Tác giả | B. Saxton, NRAO/AUI/NSF |
Giấy phép
All images and videos released by NRAO on their website are copyright protected on behalf of the National Radio Astronomy Observatory (NRAO), Associated Universities, Inc. (AUI), and the National Science Foundation (NSF), and are licensed for use under the Creative Commons Attribution 3.0 Unported license (https://creativecommons.org/licenses/by/3.0/) in accordance with the conditions below. See the NRAO Image Use Policy for complete information.
Conditions:
Notes:
|
- Bạn được phép:
- chia sẻ – sao chép, phân phối và chuyển giao tác phẩm
- pha trộn – để chuyển thể tác phẩm
- Theo các điều kiện sau:
- ghi công – Bạn phải ghi lại tác giả và nguồn, liên kết đến giấy phép, và các thay đổi đã được thực hiện, nếu có. Bạn có thể làm các điều trên bằng bất kỳ cách hợp lý nào, miễn sao không ám chỉ rằng người cho giấy phép ủng hộ bạn hay việc sử dụng của bạn.
Khoản mục được tả trong tập tin này
mô tả
24 1 2006
Lịch sử tập tin
Nhấn vào ngày/giờ để xem nội dung tập tin tại thời điểm đó.
Ngày/giờ | Hình xem trước | Kích cỡ | Thành viên | Miêu tả | |
---|---|---|---|---|---|
hiện tại | 18:55, ngày 13 tháng 8 năm 2021 | 3.000×2.513 (632 kB) | Artem.G | Uploaded a work by National Radio Astronomy Observatory (NRAO) from https://public.nrao.edu/gallery/how-to-make-a-millisecond-pulsar/ with UploadWizard |
Trang sử dụng tập tin
Sử dụng tập tin toàn cục
Những wiki sau đang sử dụng tập tin này:
- Trang sử dụng tại en.wikipedia.org
- Trang sử dụng tại fa.wikipedia.org
- Trang sử dụng tại fr.wikipedia.org
- Trang sử dụng tại uk.wikipedia.org
Đặc tính hình
Tập tin này chứa thông tin bổ sung, có thể được thêm từ máy ảnh kỹ thuật số hoặc máy quét được sử dụng để tạo hoặc số hóa tệp.
Nếu tập tin đã được sửa đổi so với trạng thái ban đầu, một số chi tiết có thể không phản ánh đầy đủ tập tin đã sửa đổi.
Tiêu đề của hình |
|
---|---|
Hướng | Thường |
Phân giải theo bề ngang | 300 điểm/inch |
Phân giải theo chiều cao | 300 điểm/inch |
Phần mềm sử dụng | Adobe Photoshop CS2 Macintosh |
Ngày giờ sửa tập tin | 2017-03-28T16:25:25-04:00 |
Tác giả | NRAO/AUI/NSF |
Bản quyền | |
Phiên bản Exif | 2.2 |
Ngày giờ số hóa | 09:35, ngày 24 tháng 1 năm 2006 |
Ngày sửa siêu dữ liệu lần cuối | 12:25, ngày 28 tháng 3 năm 2017 |
ID duy nhất của tài liệu gốc | uuid:DFE8B1608E6D11DA8518A871B0C57205 |
Ghi công / nhà cung cấp | B. Saxton, NRAO/AUI/NSF |
Nguồn gốc | NRAO/AUI/NSF |
Đề mục | How to Make a Millisecond Pulsar |
Tình trạng bản quyền | Cờ bản quyền không được đặt |
Tên ngắn |
|
Từ khóa |
|
Điều khoản sử dụng |
|
Thông tin liên lạc |
520 Edgemont Road Charlottesville, VA, 22903 USA |
Phiên bản IIM | 2 |