Bản mẫu:Hộp thông tin đập

Bách khoa toàn thư mở Wikipedia
Tài liệu bản mẫu[xem] [sửa] [lịch sử] [làm mới]

Cách sử dụng[sửa mã nguồn]

Sử dụng hộp thông tin sau đây cho tất cả các loại nhà máy điện thủy điện liên quan đến đập. Đối với tất cả các loại tích năng, sóng và nhà máy điện thủy triều, xin vui lòng sử dụng {{Infobox power station}}.

Tên chính thức{{{name_official}}}
Quốc gia{{{country}}}
Vị trí{{{location}}}
Tọa độ0°B 0°Đ / 0°B 0°Đ / 0; 0
Mục đích{{{purpose}}}
Tình trạng{{{status}}}
Khởi công{{{construction_began}}}
Khánh thành{{{opening}}}
Ngày phá bỏ{{{demolished}}}
Chi phí xây dựng{{{cost}}}
Chủ sở hữu{{{owner}}}
Điều hành{{{operator}}}
Đập và đập tràn
Loại đập{{{dam_type}}}
Chiều cao (móng){{{dam_height_foundation}}}
Chiều cao (thalweg){{{dam_height_thalweg}}}
Chiều dài{{{dam_length}}}
Độ cao ở đỉnh{{{dam_elevation_crest}}}
Chiều rộng (đỉnh){{{dam_width_crest}}}
Chiều rộng (đáy){{{dam_width_base}}}
Dung tích đập{{{dam_volume}}}
Đập tràn{{{spillway_count}}}
Loại đập tràn{{{spillway_type}}}
Dung tích đập tràn{{{spillway_capacity}}}
Hồ chứa
Tạo thành{{{res_name}}}
Tổng dung tích{{{res_capacity_total}}}
Năng lực hoạt động{{{res_capacity_active}}}
Năng lực không hoạt động{{{res_capacity_inactive}}}
Diện tích lưu vực{{{res_catchment}}}
Diện tích bề mặt{{{res_surface}}}
Chiều dài tối đa{{{res_max_length}}}
Chiều rộng tối đa{{{res_max_width}}}
Độ sâu nước tối đa{{{res_max_depth}}}
Độ cao bình thường{{{res_elevation}}}
Thủy triều{{{res_tidal_range}}}
Trạm năng lượng
Tọa độ1°1′1″B 1°1′1″Đ / 1,01694°B 1,01694°Đ / 1.01694; 1.01694
Nhà điều hành{{{plant_operator}}}
Ngày chạy thử{{{plant_commission}}}
Ngày ngừng chạy{{{plant_decommission}}}
Đầu thủy lực{{{plant_hydraulic_head}}}
Tua bin{{{plant_turbines}}}
Công suất lắp đặt{{{plant_capacity}}}
Hệ số công suất{{{plant_capacity_factor}}}
Phát điện hàng năm{{{plant_annual_gen}}}
Trang web
{{Hộp thông tin đập
| name                 = 
| name_official        = 
| image                = 
| image_size           = 
| image_caption        = 
| image_alt            = 
| location_map         = 
| location_map_size    = 
| location_map_caption = 
| location_map_alt     = 
| coordinates          = <!-- {{tọa độ|..|..|type:landmark|display=inline,title}}-->
| country              = 
| location             = 
| purpose              = 
| status               = 
| construction_began   = 
| opening              = 
| demolished           = 
| cost                 = 
| owner                = 
| operator             = 
| dam_type             = 
| dam_crosses          = 
| dam_height_foundation= 
| dam_height_thalweg   = 
| dam_length           = 
| dam_elevation_crest  = 
| dam_width_crest      = 
| dam_width_base       = 
| dam_volume           = 
| spillway_count       = 
| spillway_type        = 
| spillway_capacity    = 
| res_name             = 
| res_capacity_total   = 
| res_capacity_active  = 
| res_capacity_inactive= 
| res_catchment        = 
| res_surface          = 
| res_max_length       = 
| res_max_width        = 
| res_max_depth        = 
| res_elevation        = 
| res_tidal_range      = 
| plant_name           = 
| plant_coordinates    = 
| plant_operator       = 
| plant_commission     = 
| plant_decommission   = 
| plant_type           = 
| plant_hydraulic_head = 
| plant_turbines       = 
| plant_capacity       = 
| plant_capacity_factor= 
| plant_annual_gen     = 
| website              = 
| extra                = 

Các tên tham số và mô tả[sửa mã nguồn]

Tên tham số Mô tả
name Name of dam.
name_official Official name, if different from name. Preferably in native language.
image Image filename, without Tập tin: parameter. Animated (.gif) and media files (.ogv) are also allowed.
image_size Value to overrides the default 250px.
image_caption Caption beneath image.
image_alt Alternative text for image.
location_map Name of a location map file. The coordinates must be specified as well (see below).
location_map_size Value to overrides the default 250px.
location_map_caption Caption beneath location map.
location_map_alt Alternative text for location map.
coordinates Geographic coordinates using {{tọa độ}}. See here for more details. Remember to avoid being overly precise.
country Country where the facility is located. Do not use flag icons.
location General area where located. Avoid being overly-detailed.
purpose Purpose of the dam(s). Common reasons are power, irrigation, flood control, navigation. If there are several purposes,
consider using: Multi-purpose. Field codes:
F=Flood control, I=Irrigation,, N=Navigation, P=Power.
status Current status of the project. Enter any one of the following auto-expanding fields:
D=Decommissioned, O=Operational, P=Proposed, UC=Under construction.
construction_began Date construction began, consider using {{Start date}}.
opening Date, or future date, of inauguration. Consider using {{Start date}}.
demolished Date of demolition (i.e. removal or destruction of dam). Consider using {{End date}}.
cost Total cost of development.
owner Owner(s) of the dam. Consider limiting to the top two, and include ownership percentage if possible.
Example: Owner1: 60% <br/>Owner2: 40%
operator Operator(s) of the dam. Only use this parameter if it is different from the owner(s) of the dam.
dam_type Type of dam. Enter any one of the following auto-expanding fields:
A=Arch dam, B=Barrage, E=Embankment dam, F=Earth-fill dam, G=Gravity dam, AG=Arch-gravity dam.
dam_crosses Body of river or stream below dam
dam_height Height of dam. Deprecated parameter; use only if dam_height_foundation or dam_height_thalweg is not known.
dam_height_foundation Height over foundation bed, with metric conversions.
dam_height_thalweg Height over thalweg (riverbed), with metric conversions.
dam_length Length of dam crown, with metric conversions.
dam_elevation_crest Height of the dam's crest above sea level, with metric conversions.
dam_width_crest Width at crest of dam, with metric conversions.
dam_width_base Width at base of dam, with metric conversions.
dam_volume Volume of material in the dam structure.
spillway_count Number of spillways.
spillway_type Type of spillway.
spillway_capacity Capacity of spillway.
res_name Name of upstream body of water, if different than "dam_crosses".
res_capacity_total Capacity of reservoir, i.e. megalitres.
res_capacity_active The active, live or useful capacity (storage) of the reservoir.
res_capacity_inactive The inactive or dead capacity (storage) of the reservoir.
res_catchment Area of catchment for reservoir.
res_surface Surface area (top water level) of reservoir.
res_max_length Length of the reservoir at normal levels, with metric conversions.
res_max_width Maximum width of the reservoir at normal levels, perpendicular to length. With metric conversions.
res_max_depth Maximum water depth of reservoir.
res_elevation The reservoir's height above sea level at normal levels, ith metric conversions.
res_tidal_range Tidal range, if applicable.
plant_name Name of plant, if applicable.
plant_operator Operator(s) of the hydroelectric power plant.
plant_coordinates Geographic coordinates of the power station using {{tọa độ}}. See here for more details. Remember to avoid being overly precise.
plant_commission Power plant commissioning date. May be different than dam opening date.
plant_decommission Power plant decommissioning date. May be different than dam closing date.
plant_type Type of hydroelectric power station. Enter any one of the following auto-expanding fields:
C=Conventional, P=Pumped-storage, R=Run-of-the-river, T=Tidal barrage.
plant_hydraulic_head Hydraulic head at power station.
plant_turbines Number of turbines, with respective rated capacity.
plant_capacity Current gross installed capacity in megawatts, or planned capacity for those under development.
For those which are operational, but with additional under development, please add only the current installed value.
plant_capacity_factor Capacity factor of the power station, in percentage.
plant_annual_gen Average annual gross power generation. For a single-year value, adding the year in brackets is encouraged.
website Raw wikitext for entering website(s). Use [brackets] where appropriate
extras Free form, spans both columns. Use sparingly.

Tọa độ[sửa mã nguồn]

The coordinates should be specified using coordinates – with a {{tọa độ}} template. See Wikipedia:WikiProject Geographical coordinates#Parameters for more details about setting the coordinates_type.

Microformat[sửa mã nguồn]

The HTML mark up produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue article across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.

If the place or venue has an "established", "founded", "opened" or similar date, use {{Start date}}.

hCard uses HTML classes including:

  • adr
  • agent
  • category
  • county-name
  • extended-address
  • fn
  • label
  • locality
  • nickname
  • note
  • org
  • region
  • street-address
  • vcard

Geo is produced by calling {{coord}}, and uses HTML classes:

  • geo
  • latitude
  • longitude

Please do not rename or remove these classes; nor collapse nested elements which use them.

When giving coordinates, please don't be overly precise.

Dữ liệu bản mẫu[sửa mã nguồn]

Thể loại theo dõi[sửa mã nguồn]